How to Replace Heater Blower Motor 95-01 Ford Explorer
Difficulty: Beginner · About 75 min · Ford Explorer
Replace the heater blower motor on a 1995–2001 Ford Explorer by moving the air box and fluid bottles for access. Check the replacement connector and housing, then test the fan for steady airflow.
Tools you will need
- 8mm socket
- 10mm socket
- 11mm socket
- Ratchet
- Flat blade screwdriver
Parts and supplies
- Heater blower motor
Steps
Disconnect power and move the servo
Switch off the ignition and disconnect the negative battery cable. Remove the servo fastener and set the actuator aside with its wiring protected.
Move the air box and bottles
Release the air-box clips and lift out the filter. Remove the washer and coolant bottle fasteners, then move those parts aside without straining hoses.
Remove and install the blower motor
Unplug the motor, detach its cooling tube, remove the four 8mm bolts, and lower the motor out. Seat the replacement on its locating pins, secure it, and reconnect the tube and plug.
Restore components and test
Secure the fluid bottles, reinstall the air box, filter, and servo, then reconnect the battery. Run the fan through its speeds and listen for scraping or vibration.
Check your vehicle’s repair manual for exact specifications and fit.