How to Replace Fog Light Bulbs 04-09 Subaru Outback

Difficulty: Beginner · About 20 min · Subaru Outback

Replace a fog-light bulb on a 2004–2009 Subaru Outback through the lower splash shield, supporting the vehicle safely if extra access is needed.

Steps

1. Open the lower access

   Switch off the lights and ignition, then allow the bulb to cool. If lifting the vehicle, use approved lift points and rated stands; remove the shield clips needed to reach the back of the lamp.

2. Remove the old bulb

   Rotate the bulb counterclockwise to unlock it and disconnect its electrical plug. Avoid pulling on the wires or touching the glass of a halogen bulb.

3. Fit the replacement bulb

   Connect the correct replacement bulb and seat it fully in the socket. Rotate it clockwise until its lock engages and confirm the connector is secure.

4. Close the shield and test

   Reinstall the plastic shield and every retaining clip, then lower the vehicle if it was raised. Switch on the fog lights and check operation before driving.

Check your vehicle’s repair manual for exact specifications and fit.