How to Check and Fill Under Hood Fluids 06-11 Toyota Camry
Difficulty: Beginner · About 25 min · Toyota Camry
Inspect and top up the brake, power steering, coolant, washer, engine oil, and transmission fluids on a 2006–2011 Toyota Camry using safe checks and the reservoir markings.
Tools you will need
- Flashlight
- Funnel
- Brake fluid
- Power steering fluid
- Coolant
- Windshield washer fluid
- Engine oil
- Transmission fluid
- Clean cloth
Steps
- Open the hood safely
Pull the cabin hood release, operate the front safety latch, and raise the hood fully. Secure it with its support before reaching into the engine bay.
- Inspect brake and steering fluid
Check the brake fluid level and condition at its reservoir marks. Inspect the power steering reservoir at the cold range and add only the specified fluid if needed, then secure both caps.
- Check coolant and washer fluid
Inspect coolant only after the engine has cooled, and never open a hot radiator cap. Check the washer reservoir and refill it with suitable fluid, closing each cap securely.
- Read the engine oil level
Remove and wipe the oil dipstick, insert it fully, then withdraw it to read between its marks. Add the recommended oil gradually and wipe away spills before replacing the cap.
- Check automatic transmission fluid
Follow the owner's manual for the required engine temperature and gear position. Clean and reseat the transmission dipstick, check the correct range, and add only the specified fluid with a funnel if necessary.
Check your vehicle’s repair manual for exact specifications and fit.