How To Replace License Plate Bulbs 12-19 Nissan Versa
Difficulty: Beginner · About 30 min · Nissan Versa
Replace the license plate bulbs on a 2012–2019 Nissan Versa by removing the trunk trim, changing the bulb sockets, and securing the exterior trim again.
Tools you will need
- 10mm socket and ratchet
- Needle nose pliers
- Gloves
Parts and supplies
- License plate bulbs
Steps
- Remove the trunk exterior trim
Remove the four 10mm nuts securing the trim panel. Lift the trim away and squeeze its retaining clips with needle-nose pliers to release the piece without breaking the tabs.
- Replace the plate bulbs
Turn each bulb socket counterclockwise and remove it from the lamp. Pull the bulb straight out, press the replacement into its socket, and turn the holder clockwise to lock it.
- Reinstall trim and verify lighting
Align the exterior trim and press it into place, making sure the clips engage. Reinstall the nuts and tighten them evenly, then check both license plate lights.
Check your vehicle’s repair manual for exact specifications and fit.