How to Replace Mirror 00-04 Subaru Outback
Difficulty: Intermediate · About 40 min · Subaru Outback
Replace a side mirror on a 2000–2004 Subaru Outback by opening the door trim, unplugging the mirror harness, and securing the replacement to the door.
Tools you will need
- 8mm socket and ratchet
- Phillips screwdriver
- Flat blade screwdriver
- Trim panel tool
Parts and supplies
- Side view mirror
Steps
- Remove the door trim
Release the small pin and triangular mirror trim, then lift the switch panel and disconnect its plugs. Remove the armrest screws and handle bezel, release the perimeter clips, lift off the panel, and disconnect its wiring.
- Remove the old mirror
Peel back the access plugs behind the mirror to expose its fasteners. Support the mirror from outside, remove the three 8mm bolts, unplug the harness, and guide the mirror away from the door.
- Install the replacement mirror
Route the replacement harness through the door opening and seat the mirror pad against the panel. Hold it in position while starting all three bolts by hand, then tighten them securely and reconnect the plug.
- Reassemble and check mirror operation
Reinstall the access plugs and reconnect the door panel harness. Align the panel over the window sill, press its clips in, and refit its screws and trim; test the mirror adjustment and door switches.
Check your vehicle’s repair manual for exact specifications and fit.