How to Replace Headlight High Low Beam Marker Bulbs 05-11 Honda Civic

Difficulty: Intermediate · About 35 min · Honda Civic

Replace the high beam, low beam, and marker bulbs, including removing the splash shield for access, on a 2005-2011 Honda Civic.

Steps

1. Access the outside marker light and low beam

   Pry out the three clips on the bottom of the bumper, pull down the splash shield, then pop it out of the bumper cover.

2. Service the outside marker light

   Twist its bulb socket counterclockwise out of the light, push the P215W (1157 dual-filament) bulb in and turn it to remove it, push in and turn the new bulb, then twist the socket clockwise back into the light.

3. Service the low beam bulb

   Push down the lock and squeeze the connectors to disconnect them, turn the socket counterclockwise out of the light, pull the 9006 bulb out, press in the new one, turn the socket clockwise, reconnect the connector, then press the splash shield back into the bumper and its clips.

4. Service the high beam bulb

   Press the tab to disconnect the wiring harness, turn the socket counterclockwise, pull the 9005 bulb out with gloves on, press the new bulb on, turn the socket clockwise, reconnect the harness, then slide the windshield washer reservoir aside first if working on the passenger side.

Check your vehicle’s repair manual for exact specifications and fit.