How to Replace Bumper Cover 03-11 Honda Element
Difficulty: Beginner · About 3 min · Honda Element
Remove and reinstall the bumper cover on a 2003–2011 Honda Element, releasing its corner bolts and fender-flare clips while preserving grille and fan-shroud retainers.
Tools you will need
- 10mm Socket
- 8mm Socket
- Ratchet
- Trim Tool Set
- Flat Blade Screwdriver
Steps
Release bumper and flare fasteners
Protect painted edges and remove the corner bolts, lower clips, and fender-flare fasteners. Release the fan-shroud and grille clips without bending their tabs.
Separate and support the cover
Disengage the bumper from both fender flares and headlamp guides. Support it across its width as you lift it away from the vehicle.
Align the bumper for installation
Position the cover and engage its side guides with the fender flares. Reinstall a center grille clip to hold it while you align the remaining tabs.
Secure and inspect
Restore the fan-shroud, headlamp, inner-fender, and flare clips, then install the corner bolts. Check the bumper edges are seated evenly and secure.
Check your vehicle’s repair manual for exact specifications and fit.