How to Replace Rear Door Speaker 02-08 Dodge Ram
Difficulty: Intermediate · About 45 min · Dodge Ram
Replace a rear door speaker on a 2002–2008 Dodge Ram by removing the door panel and transferring its wiring connection and mounting screws.
Tools you will need
- 10mm socket
- Ratchet and extensions
- Phillips screwdriver
Parts and supplies
- Rear door speaker
Steps
- Remove the door panel
Remove the 10mm fastener behind the interior handle and take the handle off. Remove the panel screw, lift the panel away, and disconnect the window switch harness.
- Remove the old speaker
Remove the three Phillips screws retaining the speaker. Pull it from the door opening and unplug its wiring connector.
- Install the replacement speaker
Connect the vehicle harness to the replacement speaker and seat it in the opening. Reinstall the three mounting screws without overtightening them.
- Refit the door panel
Reconnect the window switch and position the panel on the door. Refit the lock bezel, panel screw, and interior handle with its 10mm fastener.
- Test the speaker
Play audio at a low level and confirm the speaker produces sound without rattling. Verify the window switch and door handle operate normally.
Check your vehicle’s repair manual for exact specifications and fit.