How to Change Oil in Most Cars - Subject Car: 94-97 Honda Accord
Difficulty: Beginner · About 60 min · Honda Accord
Change engine oil and filter on the 1994–1997 Honda Accord example vehicle. Follow the oil grade and capacity for the engine actually installed, support the car securely, and inspect for leaks and a correct final dipstick level.
Tools you will need
- Floor jack
- Jack stands
- Drain pan
- Oil filter wrench
- Funnel
- Cloth rags
Parts and supplies
- Engine oil
- Oil filter
Steps
Raise the car and drain the oil
Warm the engine briefly, turn it off, then lift at approved points and support the car on jack stands. Place a pan below the drain, remove the plug, and allow the oil to empty.
Remove the old oil filter
Loosen the filter with a filter wrench and let residual oil drain into the pan. Wipe the mounting surface clean and confirm the old filter gasket came off.
Install the new filter and drain plug
Oil the new filter gasket and install it according to its maker's directions. Clean and reinstall the drain plug, tightening it to the vehicle specification.
Refill and check the level
Lower the car, add the specified oil quantity through a funnel, and secure the filler cap. Start briefly, inspect for leaks, switch off, wait, then verify and adjust the dipstick level.
Dispose of used oil responsibly
Transfer used oil to a sealed container and take it with the filter to an approved recycling or collection site. Do not pour oil onto the ground or into a drain.
Check your vehicle’s repair manual for exact specifications and fit.