How to Replace Liftgate Supports 01-07 Volvo V70
Difficulty: Intermediate · About 4 min · Volvo V70
Replace the liftgate support struts on a 2001–2007 Volvo V70 while securely supporting the hatch, then confirm both ball sockets lock and the hatch stays raised.
Tools you will need
- T25 Torx Driver
- 10mm Socket
- Ratchet
- Trim Tool Set
- Flat Blade Screwdriver
Parts and supplies
- Matching liftgate support struts
Steps
Support the liftgate and remove trim
Have a helper hold the liftgate fully open or use a secure support prop; never rely on the struts being replaced. Remove the cargo-light and upper and side trim fasteners carefully.
Release the old support struts
Expose each ball socket and release its retaining clip without removing it completely. Pop the support ends from their mounting studs while the hatch remains supported.
Install the replacement supports
Press each new socket onto its matching stud until it locks, then secure the retaining clip. Replace supports one at a time and confirm both ends are seated.
Reassemble and verify
Reconnect the cargo light and reinstall the side and upper trim. Carefully test that the hatch opens smoothly and stays raised without assistance.
Check your vehicle’s repair manual for exact specifications and fit.