How To Replace Front Disc Brakes 03-12 Volvo XC90
Difficulty: Intermediate · About 55 min · Volvo Xc90
Replace front pads and rotors on a Volvo XC90, retracting the caliper piston gradually and confirming a firm brake pedal before driving.
Tools you will need
- Floor Jack
- Jack Stands
- 18mm Socket
- 10mm Socket
- Large C-Clamp
- Torque Wrench
Parts and supplies
- Front brake pads
- Front brake rotors, if worn
Steps
Raise and inspect the brakes
Loosen the lug nuts while the tire is on the ground, raise and support the vehicle, then remove the wheel. Check pad thickness and inspect rotors for grooves or cracks.
Remove the caliper and rotor
Remove the caliper fasteners and support the caliper securely. Remove the rotor retaining screw, then slide the rotor off the hub.
Install new rotor and pads
Clean the hub and seat the replacement rotor. Retract the piston gradually with a clamp, install the new pads, and reinstall the caliper using vehicle-specific torque values.
Reassemble and check braking
Refit the wheel and tighten its lug nuts to specification in a crossing pattern. Pump the pedal until firm and verify braking at low speed in a clear area.
Check your vehicle’s repair manual for exact specifications and fit.