How to Replace Headlight Wiper Motor 00-07 Volvo V70

Difficulty: Advanced · About 100 min · Volvo V70

Replace the headlight wiper motor on a 2000–2007 Volvo V70 after removing the bumper cover and headlamp assembly for access.

Steps

1. Remove the front bumper cover

   Release the upper clips and trim pieces, remove the headlamp wiper arm and bumper fasteners, then pull the cover forward. Disconnect its wiring and washer hoses before placing it on a padded surface.

2. Remove the headlamp assembly

   Remove the plastic bumper mount panel fasteners and headlamp mounting bolts. Pull the lamp forward, unplug the turn signal and main harness connectors, and set it aside without scratching the lens.

3. Replace the headlight wiper motor

   Unplug the wiper motor connector and remove the motor from its mount. Position the replacement motor, reconnect its wiring, and ensure the arm shaft and linkage align before tightening the mounting hardware.

4. Reinstall the headlamp and bumper

   Reconnect the headlamp wiring, position the lamp and wiper motor bracket, and secure all fasteners. Refit the bumper cover, reconnect the washer hoses and wiring, reinstall the wiper arm, and test both headlamps and wiper function.

Check your vehicle’s repair manual for exact specifications and fit.