How to Remove Front Bumper on 97-01 Toyota Camry

Difficulty: Beginner · About 60 min · Toyota Camry

Remove and reinstall the front bumper cover on a 1997–2001 Toyota Camry without damaging fender liners or painted edges.

Steps

1. Prepare and release the upper fasteners

   Park on a level surface, set the brake, and protect adjacent painted fenders with painter's tape. Remove the upper bolts and plastic retainers, then raise and safely support the front if access below is needed.

2. Release lower and side retainers

   Remove the fasteners along the lower edge and beneath each fender liner. Pull the liner back carefully to reach the hidden side fastener, then release the bumper cover from its side clips without forcing the tabs.

3. Remove the bumper cover

   With a helper supporting the cover, release the side edges from the fenders and draw the cover forward. Disconnect any fog lamp or sensor wiring before setting the cover on a padded surface.

4. Refit and align the cover

   Reconnect any wiring and position the cover with all tabs aligned to their slots. Engage the side clips, reinstall the lower and upper fasteners, and check even gaps before removing the protective tape.

Check your vehicle’s repair manual for exact specifications and fit.