How to Replace Master Window Switch 98-01 Nissan Altima

Difficulty: Beginner · About 30 min · Nissan Altima

Replace the master power window switch on a 1998–2001 Nissan Altima by separating the switch from its bezel and reconnecting the harness.

Steps

1. Lift the switch bezel

   Use a flat screwdriver carefully to raise the power window switch bezel from the door pull. Disconnect its wiring plug after releasing the connector lock.

2. Separate the old switch

   Remove the Torx fasteners retaining the switch to the bezel. Carefully separate the switch without bending the bezel tabs or damaging the surrounding trim.

3. Install the replacement

   Place the new switch into the bezel and reinstall its retaining screws. Reconnect the wiring harness until its lock engages, then align the assembly with the door pull.

4. Seat and test the switch

   Press the bezel and switch assembly into the door pull until its clips hold. Test the windows and confirm the switch panel remains secure.

Check your vehicle’s repair manual for exact specifications and fit.