How to Replace Headlight Switch 98 Dodge Durango
Difficulty: Intermediate · About 45 min · Dodge Durango
Replace the headlight switch, which sits behind the dash bezel, on a 1998 Dodge Durango.
Tools you will need
- Ratchet
- 12mm socket
- 13mm socket
- Flat blade screwdriver
- Phillips head screwdriver
Parts and supplies
- Headlight switch
Steps
- Disconnect the battery
Pop the hood and disconnect the negative terminal with the 12mm and 13mm wrenches.
- Access and remove the old switch
Set the parking brake, turn the key and pull the shift lever down, pry up the dash bezel and disconnect the fog light switch, remove the three Phillips screws holding the headlight switch, disconnect its wiring harness, depress the tab to free the plunger, then remove the screw at the back of the assembly and take off the mounting plate.
- Install the new switch
Mount it to the plate and secure its Phillips screw, depress the tab to refit the bezel and plunger, plug in the wiring harness, secure the switch with its three screws, refit the dash bezel, reconnect the fog light switch and clip the trim down, then return the shift lever to park and turn the key off.
- Reconnect the battery
Reconnect the negative terminal with the two wrenches.
Check your vehicle’s repair manual for exact specifications and fit.