How to Replace Trunk Latch 06-11 Toyota Camry
Difficulty: Beginner · About 30 min · Toyota Camry
Replace the trunk latch on a Toyota Camry by transferring the lock rod and electrical connector, then testing release before restoring the liner.
Tools you will need
- 10mm Socket
- Ratchet
- Trim Tool Set
- Flat Blade Screwdriver
Parts and supplies
- Trunk latch assembly
Steps
Remove the trunk liner
Open the trunk and release the liner clips with a trim tool. Fold the liner aside to expose the latch wiring, lock rod, and mounting bolts.
Remove the old latch
Disconnect the electrical plug and release the lock rod from its clip. Remove the latch bolts and withdraw the assembly from the trunk lid.
Install the replacement latch
Position the new latch and start its bolts by hand. Tighten them evenly, reconnect the electrical plug, and secure the lock rod in its retaining clip.
Test and reinstall the liner
With the trunk still open, test the release and lock functions and verify the latch holds securely. Refit the liner clips only after the latch works correctly.
Check your vehicle’s repair manual for exact specifications and fit.