How to Replace Front Brakes 06-08 Dodge Ram 1500

Difficulty: Intermediate · About 55 min · Dodge Ram

Replace front brake pads and rotors on a Dodge Ram 1500, keeping the caliper supported and checking brake pedal feel before driving.

Steps

1. Lift the truck and inspect

   Loosen the lug nuts while the truck is on the ground, raise and support it securely, then remove the wheel. Inspect the pads and rotor for uneven wear or scoring.

2. Remove caliper, bracket, and rotor

   Remove the caliper bolts and support the caliper by the suspension. Take out the pads and bracket, then remove the rotor without striking the wheel studs.

3. Install replacement brake parts

   Clean the hub face and replacement rotor. Service the caliper slides, install the bracket to vehicle-specific torque, retract the piston slowly, then fit the pads and caliper.

4. Reassemble and check pedal

   Reinstall the wheel and torque its nuts to specification in a crossing pattern. Pump the brake pedal until firm and test braking at low speed in a safe area.

Check your vehicle’s repair manual for exact specifications and fit.