How to Check Engine Fluids 11-16 Subaru Impreza

Difficulty: Beginner · About 20 min · Subaru Impreza

Check brake fluid, washer fluid, coolant, and engine oil on a 2011–2016 Subaru Impreza and top up only with vehicle-approved products.

Steps

1. Inspect brake fluid

   Park the vehicle level and compare the reservoir level with its MIN and MAX marks. Keep the system closed; low or contaminated brake fluid calls for diagnosis and proper service.

2. Check washer fluid

   Remove the washer-fluid cap and check the reservoir level. Add suitable windshield washer fluid as needed, then close the cap securely.

3. Check coolant when fully cold

   Wait until the engine is completely cool before checking the reservoir. Bring the coolant to the cold fill mark using the specified mixture, then tighten the cap.

4. Read the engine-oil dipstick

   With the engine off and vehicle level, remove and wipe the dipstick, reinsert it fully, and check the level again. Add the recommended oil gradually if below range and recheck.

5. Finish the inspection

   Secure the dipstick and all caps, then look for fluid leaks around the engine bay. Use the owner’s manual for fluid specifications and any model-specific level-check procedure.

Check your vehicle’s repair manual for exact specifications and fit.