How to Replace Rear Interior Door Handle 00-07 Toyota Highlander
Difficulty: Intermediate · About 35 min · Toyota Highlander
Replace the rear interior door handle on a 2000–2007 Toyota Highlander by removing the door trim, reconnecting the latch cables, and securing the handle and panel.
Tools you will need
- 10mm socket and ratchet
- Phillips screwdriver
- Trim panel tool
Parts and supplies
- Rear interior door handle
Steps
- Remove the rear door panel
Pry up the door-pull pocket and handle covers, then remove their Phillips screws. Release the panel clips with a trim tool, lift the panel away, and unplug the window switch.
- Remove the interior handle
Remove the 10mm handle bolt and lift the handle away from the door. Unhook both latch cables from their retainers, noting their routing before removing the old part.
- Install the replacement handle
Attach the latch cables to the matching points on the new handle and verify their clips are secured. Position the handle on the door and tighten its 10mm fastener to specification.
- Reinstall trim and test the latch
Reconnect the window switch, hang the panel on the door, and press its clips into place. Refit the handle covers and screws, then test the lock and release before closing the door.
Check your vehicle’s repair manual for exact specifications and fit.