How to Replace Front Brakes 00-05 Buick LeSabre
Difficulty: Intermediate · About 55 min · Buick Lesabre
Renew front brake pads and rotors on a Buick LeSabre, keeping the caliper supported and verifying a firm pedal before road use.
Tools you will need
- Floor Jack
- Jack Stands
- 15mm Socket
- Large C-Clamp
- Wire Brush
- Torque Wrench
Parts and supplies
- Front brake pads
- Front brake rotors, if needed
Steps
Lift the vehicle and inspect
Loosen the lug nuts with the tire on the ground, raise and support the vehicle, then remove the wheel. Check pad wear and inspect the rotor faces for scoring or damage.
Remove the caliper and rotor
Remove the caliper bolts and support the caliper so its hose is not stretched. Remove the pads and bracket, then slide the rotor from the hub.
Install replacement brake parts
Clean the hub and bracket slides, seat the replacement rotor, and reinstall the bracket using vehicle-specific torque values. Retract the piston gradually, fit the pads, and reinstall the caliper.
Reassemble and test
Refit the wheel and torque the lug nuts to specification in a crossing pattern. Pump the pedal until firm and perform a cautious low-speed brake check.
Check your vehicle’s repair manual for exact specifications and fit.