How to Check Fluids 05-10 Chrysler 300
Difficulty: Beginner · About 20 min · Chrysler 300
Check brake fluid, coolant, power-steering fluid, engine oil, and washer fluid on a 2005–2010 Chrysler 300 using the correct marked reservoirs and dipstick procedures.
Tools you will need
- Flashlight
- Clean cloth
- Vehicle-specified fluids
Steps
Inspect brake fluid
Park level and check the reservoir against its MIN and MAX marks. Keep the cap secured unless topping up is necessary, and have dark or contaminated fluid and any low level investigated.
Check coolant only when cold
Wait until the engine is fully cold before opening the coolant reservoir. Read its level marks and add only the specified coolant mixture, then secure the cap.
Check power-steering fluid
If the vehicle is equipped with a serviceable hydraulic steering reservoir, use its dipstick or marks and the owner’s manual procedure. Add only the specified fluid and investigate leaks or burnt, cloudy fluid.
Read engine oil
With the vehicle level and engine off, remove and wipe the oil dipstick, insert it fully, and read the level again. Add the recommended oil gradually through the filler and recheck to avoid overfilling.
Top up washer fluid
Fill the washer reservoir with windshield washer fluid and close its cap. Secure all covers and inspect beneath the car for fresh fluid leaks.
Check your vehicle’s repair manual for exact specifications and fit.