How to Replace Front ABS Wheel Speed Sensor 06-11 Honda Civic
Difficulty: Intermediate · About 40 min · Honda Civic
Replace a failed front ABS wheel speed sensor behind the rotor on a 2006-2011 Honda Civic.
Tools you will need
- Ratchet
- Socket extensions
- 10mm socket
- Flat blade screwdriver
- Needle-nose pliers
- Rust penetrant
Parts and supplies
- Front ABS wheel speed sensor
Steps
- Remove the old sensor
Pop the retaining clip out of the splash shield behind the rotor, unplug the sensor's wiring harness, and free the harness from its clips and bracket. Soak a stuck sensor in rust penetrant first, then remove the single 10mm mounting bolt and ease the sensor out of the knuckle.
- Install the new sensor
Press the new sensor into the knuckle and tighten its 10mm bolt, then route the wiring harness back through its clips and bracket and reconnect the connector.
Check your vehicle’s repair manual for exact specifications and fit.