How to Check and Fill Fluids 07-13 Nissan Rogue
Difficulty: Beginner · About 25 min · Nissan Rogue
Inspect brake, engine oil, automatic transmission, washer, and coolant fluids on a 2007–2013 Nissan Rogue using the correct dipstick procedures and safe coolant checks.
Tools you will need
- Flashlight
- Clean cloth
- Brake fluid
- Engine oil
- Transmission fluid
- Windshield washer fluid
- Coolant
- Funnel
- Flat blade screwdriver
Steps
- Inspect brake fluid
Check that the brake fluid sits between the reservoir's minimum and maximum marks and appears clear. Dark or murky fluid calls for proper service; secure the cap after inspection.
- Read engine oil level
On level ground with the engine off, wipe the oil dipstick and reinsert it fully. Withdraw it to check the range, then add the recommended oil gradually if the reading is low.
- Check transmission fluid
Follow the owner's manual for the correct temperature and engine state. Release the dipstick retainer, clean and fully reseat the dipstick, then read the level and add only the specified fluid through the tube if needed.
- Refill washer reservoir
Open the washer-fluid cap and add suitable fluid to the reservoir. Close the cap securely and wipe away any spill.
- Inspect coolant when cold
Let the engine cool completely before checking coolant or opening any cap. Compare the radiator and reservoir levels with the specified marks, then secure both caps.
Check your vehicle’s repair manual for exact specifications and fit.