How to Replace Headlights 93-97 Ford Ranger

Difficulty: Intermediate · About 60 min · Ford Ranger

Replace a headlight bulb or the full headlight assembly, including removing the grille, and aim it on a 1993-1997 Ford Ranger.

Steps

1. Handle the new bulbs carefully

   Avoid touching the bulb's glass with your fingers, since skin oil can burn into it and foul the light; clean it with rubbing alcohol and a soft cloth if that happens.

2. Swap just the headlight bulbs

   Pop and secure the hood, reach behind the headlight assembly and remove the bulb, then reverse the steps to install the new one.

3. Remove the grille

   Remove its six Phillips screws, then pull it off.

4. Remove the parking light assembly

   Remove its 11mm nut to pull it out, unclip it, then unplug the wiring harness and bulb.

5. Remove the old headlight assembly

   Pull up the tabs anchoring it, pull it out, then disconnect its wiring harness.

6. Aim the new headlights

   Use a Phillips screwdriver on the adjuster screws to match the old headlight's aim.

7. Install the new headlight assembly

   Plug in the bulbs and harness, clip it into place, then bolt it in with the 11mm socket and ratchet.

8. Install the grille

   Put it into place, then secure it with the six Phillips screws.

Check your vehicle’s repair manual for exact specifications and fit.