How To Replace Driver Side Radiator Cooling Fan 98-02 Honda Accord
Difficulty: Intermediate · About 25 min · Honda Accord
Replace the driver-side radiator cooling fan on a 1998-2002 Honda Accord.
Tools you will need
- Flat blade screwdriver
- 10mm socket
- Ratchet
Parts and supplies
- Radiator cooling fan
Steps
- Remove the old fan
Disconnect its wiring harness and pry it out of the retaining clips, remove the fan's three 10mm bolts, then pull it up and out.
- Install the new fan
Thread on the lower 10mm bolt and seat the fan on it, start the two top 10mm bolts, tighten all three, then clip the wiring harness back in and connect it.
Check your vehicle’s repair manual for exact specifications and fit.