How to Replace Tail Light Assembly 04-09 Subaru Outback
Difficulty: Beginner · About 15 min · Subaru Outback
Replace the tail light assembly on a 2004-2009 Subaru Outback.
Tools you will need
- Socket extensions
- Flat blade screwdriver
- 10mm socket
- Ratchet
- Trim tool set
Parts and supplies
- Tail light assembly
Steps
- Remove the tail light
Remove its Phillips screws, pop its clips out with a flat blade screwdriver, pop up the cover, remove its bolts with a 10mm socket, then pull it straight back.
- Install the tail light
Line up its pins with the car's clips, slide it into place, tighten its 10mm bolts, press the cover back on, then press in its clips and Phillips screws.
Check your vehicle’s repair manual for exact specifications and fit.