How to Check Your Fluids on a 98-03 Toyota Camry
Difficulty: Beginner · About 25 min · Toyota Camry
Check brake, automatic transmission, engine oil, washer, coolant, and power steering fluid on a 1998–2003 Toyota Camry using the correct temperature and level procedures.
Tools you will need
- Flashlight
- Brake fluid
- Transmission fluid
- Engine oil
- Windshield washer fluid
- Coolant
- Power steering fluid
Steps
- Inspect brake fluid
Check the brake reservoir level and fluid appearance. It should look clear and fall within its marks; cloudy or dark fluid should be assessed and serviced, and the reservoir should not be allowed to run low.
- Check transmission fluid
Bring the transmission to the operating condition specified in the owner's manual and park on level ground. Clean and reinsert the transmission dipstick fully, then read the level at the correct marks.
- Read engine oil
With the engine off and the vehicle level, wipe the oil dipstick and seat it fully. Withdraw it to check the range, then add the specified oil in small quantities if low.
- Check washer and coolant
Top up the washer reservoir to its indicated line. Inspect coolant only after the engine has cooled completely, using the reservoir marks and keeping clear of a hot pressurized radiator cap.
- Inspect power steering fluid
Check the power steering reservoir at the indicated level mark. Note any dark color or burnt smell and arrange appropriate service if the fluid condition is poor.
Check your vehicle’s repair manual for exact specifications and fit.