How to Replace Mirror 02-06 Honda CR-V

Difficulty: Beginner · About 50 min · Honda Cr-v

Replace a side mirror on a 2002–2006 Honda CR-V while preserving the door water shield and reconnecting mirror wiring.

Steps

1. Remove the door panel

   Release the trim clip and switch panel, unplug its connectors, and remove the handle and armrest screws. Detach the handle cable, release the panel clips, lift the panel off, and disconnect its remaining harnesses.

2. Remove the old mirror

   Peel back the water shield enough to reach the mirror plug and release the harness from its retainers. Remove the three mounting nuts while supporting the mirror, then guide the assembly and wire out of the door.

3. Install the replacement mirror

   Feed the replacement harness through the opening and seat the mirror against its gasket. Start and tighten the three nuts evenly, secure the harness in its retainers, reconnect the plug, and reseal the water shield.

4. Reinstall trim and test mirror

   Reconnect the door panel wiring and handle cable, align the panel, and press its clips home. Reinstall screws and switch trim, then test mirror adjustment and door handle operation.

Check your vehicle’s repair manual for exact specifications and fit.