How to Replace Outer Tie Rod 11-17 Toyota Camry
Difficulty: Advanced · About 35 min · Toyota Camry
Replace the outer tie rod on a 2011-2017 Toyota Camry.
Tools you will need
- Side cutters
- Socket extensions
- Torque wrench
- 17mm socket
- Jack stands
- 19mm wrench
- Anti-seize grease
- Ratchet
- Floor jack
- 1/2 inch breaker bar
Parts and supplies
- Outer tie rod
Steps
- Remove the wheel
Loosen the 19mm lug nuts with the car on the ground, then raise and support it and pull the wheel.
- Remove the old tie rod
Loosen the 19mm jam nut, cut out the castle nut's cotter pin, remove the 17mm castle nut, jolt the spindle free with a hammer, then unscrew the tie rod end.
- Install the new outer tie rod
Grease the threads, thread the end back onto the inner tie rod, seat the spindle in the knuckle, torque the 17mm castle nut to about 36 ft-lb, then fit a new cotter pin and trim the excess.
- Reinstall the wheel
Torque the lug nuts to about 76 ft-lb in a crossing pattern.
Check your vehicle’s repair manual for exact specifications and fit.