How to Replace Cooling Fan 07-10 Hyundai Elantra
Difficulty: Intermediate · About 90 min · Hyundai Elantra
Replace the radiator cooling fan assembly on a 2007–2010 Hyundai Elantra, working only with a cool engine and checking the fan connector, overflow hose, and shroud before startup.
Tools you will need
- Socket Extensions
- 10mm Socket
- Ratchet
- Pocket Screwdriver
Parts and supplies
- Radiator cooling-fan assembly
Steps
- Let the engine cool and remove the air collector
Park on level ground and wait until the cooling system is fully cool. Remove the air-collector fasteners and lift the collector out, keeping dirt away from the intake opening.
- Disconnect hoses and fan wiring
Release the overflow hose from its clips and move it aside without kinking it. Unplug the fan connector and remove the upper hose-retaining fastener from the shroud.
- Remove the old fan assembly
Release the fan-shroud retaining tabs at the radiator sides. Lift the complete fan assembly straight up and out, keeping its blades clear of the radiator fins.
- Install the replacement fan
Lower the new fan assembly into its radiator mounts and engage the retaining tabs. Reconnect the electrical plug and secure the upper hose clip and overflow hose in their original locations.
- Reinstall the air collector and test
Refit the air collector and tighten its fasteners. Start the engine and verify the fan operates as commanded, then check that the overflow hose and wiring remain clear of the fan blades.
Check your vehicle’s repair manual for exact specifications and fit.