How to Replace Air Intake Hose 92-93 Toyota Camry

Difficulty: Beginner · About 30 min · Toyota Camry

Replace the air intake hose on a 1992–1993 Toyota Camry by transferring the intake resonator and sensor, then securing the hose clamps at both ends.

Steps

1. Remove the old intake hose

   Loosen the hose clamp and use pliers to disconnect the attached sensor hose. Release the hose from the throttle body and lift it out of the engine bay.

2. Transfer the attached components

   Move the intake resonator and sensor from the old hose to the replacement. Transfer the clamps and make sure the fittings match their original positions.

3. Install the new hose

   Fit the replacement hose between the throttle body and air cleaner. Seat both ends fully and reconnect the sensor hose.

4. Secure and inspect

   Tighten the clamps at both connections and check that the hose is not kinked or touching hot or moving parts. Start the engine and listen for intake leaks.

Check your vehicle’s repair manual for exact specifications and fit.