How to Replace Headlights 09-11 Honda Pilot
Difficulty: Intermediate · About 60 min · Honda Pilot
Replace a headlight assembly on a 2009–2011 Honda Pilot by removing the front bumper cover and transferring the lamp bracket and connectors.
Tools you will need
- 10 mm socket and ratchet
- Trim tool
- Needle-nose pliers
Parts and supplies
- Compatible headlight assembly and bulbs if required
Steps
Remove the bumper cover
Switch off the lights and ignition. Release the radiator-shield, wheel-well, and lower bumper retainers, unplug any attached wiring, and support the cover as it is pulled forward.
Remove the headlight
Remove the upper and lower lamp fasteners and release the locating clip. Pull the assembly forward and disconnect its wiring plugs without pulling on the wires.
Transfer the bracket and install
Move the required bracket and serviceable sockets to the replacement lamp. Connect the harnesses, align the locating points, and secure all mounting fasteners evenly.
Reinstall the bumper cover
Align the bumper with its brackets and press the side edges into their clips. Reinstall the upper, lower, and wheel-well fasteners and ensure no harness is pinched.
Verify beam operation
Test all headlamp functions and check the beam pattern against a level wall. Follow the service procedure for adjustment or have a shop set the aim accurately.
Check your vehicle’s repair manual for exact specifications and fit.