How to Replace Front Door Speaker 00-07 Toyota Highlander
Difficulty: Intermediate · About 45 min · Toyota Highlander
Replace a front door speaker on a 2000–2007 Toyota Highlander by removing the door panel and reconnecting the switch, lamp, and speaker wiring.
Tools you will need
- 10mm socket
- Ratchet and extensions
- Phillips screwdriver
- Flat blade screwdriver
- Trim tool
Parts and supplies
- Front door speaker
Steps
Remove the door panel
Unplug and remove the master window switch, then release the door pull and sail panel trim. Remove the handle and panel screws, free the clips, and disconnect the courtesy light before lifting the panel away.
Remove the old speaker
Remove the three 10mm speaker fasteners and unplug the speaker wiring. Lift the speaker from the door opening.
Install the replacement speaker
Connect the harness to the replacement speaker and seat it in the opening. Reinstall and evenly secure the three mounting bolts.
Reinstall the door panel
Reconnect the courtesy light and switch wiring, then align the panel and press its clips into place. Reinstall the screws and trim pieces and seat the master switch.
Check speaker and controls
Test the speaker at a low volume and verify there is no vibration. Confirm the window switch and courtesy lamp operate normally.
Check your vehicle’s repair manual for exact specifications and fit.