How to Replace Cabin Air Filter 03-08 Honda Pilot

Difficulty: Beginner · About 20 min · Honda Pilot

Replace the cabin air filter, which sits behind an access bar under the glove box, on a 2003-2008 Honda Pilot.

Steps

1. Lower the glove box

   Release its interior clips and outer tabs, lower it down, then remove the Phillips screws and the single 8mm bolt holding the access bar above it and take the bar out.

2. Remove the old filter

   Lift the access door's tab to swing it open, then slide the old filter out.

3. Fit the new filter

   Match the airflow arrow on the new filter to the one on the housing, then press the access door closed, top first.

4. Reinstall the glove box

   Refit the access bar and its 8mm bolt and Phillips screws, lift the glove box back into place, then press its clips and tabs closed.

Check your vehicle’s repair manual for exact specifications and fit.