How To Remove Rear Door Panel 98-02 Lincoln Town Car
Difficulty: Beginner · About 35 min · Lincoln Town Car
Remove the rear door trim panel on a 1998–2002 Lincoln Town Car to access the window regulator, latch, or wiring.
Tools you will need
- Flat Blade Screwdriver
- T20 Driver
- Phillips Head Screwdriver
- Putty Knife
Steps
Disconnect the switch panel
Gently lift the window switch panel with a trim-safe tool and unplug its connector. Remove the Torx fasteners beneath the pull handle, take off the pull, and remove the Phillips screws from the handle and lower panel.
Release the door panel
Remove the lock knob and work a putty knife around the panel perimeter to release its clips. Lift the panel up and away from the door, then unplug the courtesy lamp before setting it on a protected surface.
Reinstall the door panel
Reconnect the courtesy light and hang the panel over the window sill, ensuring the lock rod passes through its opening. Press the clips into place, reconnect the switch, and reinstall the screws, pull handle, lock knob, and switch trim.
Check door functions
Operate the window switch, door lock, latch, and courtesy lamp before closing the door. Confirm the panel sits evenly and no wiring is trapped behind it.
Check your vehicle’s repair manual for exact specifications and fit.