How to Replace Master Power Window Switch 98-02 Lincoln Town Car
Difficulty: Beginner · About 30 min · Lincoln Town Car
Replace the master power window switch on a 1998–2002 Lincoln Town Car by transferring it to the original switch plate and reconnecting its harnesses.
Tools you will need
- Flat blade screwdriver
Parts and supplies
- Master power window switch
Steps
- Lift the switch plate
Use a flat screwdriver carefully to release the switch plate from the door. Unplug the wiring harnesses, depressing their locks as needed.
- Remove the old switch
Release the four retaining tabs that hold the switch to the plate. Withdraw the switch and inspect the plate for cracked or damaged tabs.
- Install the replacement switch
Press the new switch into the plate until all retaining tabs engage. Reconnect the electrical harnesses and confirm they are fully seated.
- Refit and test the panel
Hook the rear of the switch plate into the door first and press the rest down until it snaps in. Test the window controls and check that the plate is secure.
Check your vehicle’s repair manual for exact specifications and fit.