How to Replace Headlights 03-07 Saab 9-3
Difficulty: Advanced · About 45 min · Saab 9-3
Replace a headlight assembly and aim the beam on a 2003-2007 Saab 9-3.
Tools you will need
- Socket extensions
- Flat blade screwdriver
- 8mm socket
- 10mm socket
- Ratchet
- Needle-nose pliers
Parts and supplies
- Headlight assembly
Steps
- Remove the headlight assembly
Open and secure the hood, disconnect the negative battery terminal with an 8mm wrench, pry up the clips securing the plastic cover over the headlight with a flat blade screwdriver, unclip the bumper cover's push clips and bolts, disconnect its wiring harness, release the wiper fluid hose clamp with pliers, remove the headlight's mounting bolts, lift it up and out, then unplug its harness and bulbs.
- Install the new headlight assembly
Plug the bulbs and harness back in, then bolt the assembly back in with a 10mm socket and ratchet.
- Aim the headlights
Use a Phillips screwdriver on the two adjusting screws to aim them, then close the hood.
Check your vehicle’s repair manual for exact specifications and fit.