How To Replace Side Mirror 03-11 Saab 9-3
Difficulty: Intermediate · About 3 min · Saab 9-3
Replace a side mirror on a 2003–2011 Saab 9-3 by disconnecting the battery and door wiring, securing the replacement, and checking mirror and window functions afterward.
Tools you will need
- Flat Blade Screwdriver
- T30 Torx Driver
- Door Panel Removal Tool
- 10mm Wrench
Parts and supplies
- Compatible side mirror assembly
Steps
Disconnect the battery
Turn the ignition off and isolate the negative battery cable before unplugging door switches. Keep the terminal away from the battery post while working.
Remove the door panel
Release the door-pull trim and screws, then free the panel clips. Lift the panel away and disconnect the latch cables, lock wiring, and window-switch plugs.
Replace the mirror
Remove the base trim and unplug the mirror control. Remove its fasteners, guide the mirror from the door, then install the replacement and reconnect its harness.
Reassemble and test
Reconnect door wiring and latch cables, align the panel, and press its clips into place. Refit the screws and trim, reconnect the battery, and test mirror and window controls.
Check your vehicle’s repair manual for exact specifications and fit.