How to Replace Rear Sway Bar Link 03-14 Volvo XC90

Difficulty: Intermediate · About 40 min · Volvo Xc90

Replace the rear sway bar links on a Volvo XC90, counterholding the studs and confirming the new links are seated before reinstalling the wheels.

Steps

1. Raise the vehicle and remove a wheel

   Loosen the wheel bolts before lifting, then support the vehicle securely and remove the wheel if it improves access to the link.

2. Remove the old link

   Apply penetrant to the nuts and studs. Counterhold each stud with the appropriate tool while removing the nuts, then withdraw the link from both mounts.

3. Install the replacement link

   Seat the upper and lower studs in their mounting holes and hand-start both nuts. Counterhold the studs while tightening to vehicle-specific torque values.

4. Refit the wheel and check

   Mount the wheel and hand-start its bolts. Lower the vehicle, torque the wheel bolts to specification, and verify there is no link contact or clunk on a short drive.

Check your vehicle’s repair manual for exact specifications and fit.