How To Replace Master Window Switch 02-06 Honda CR-V
Difficulty: Beginner · About 20 min · Honda Cr-v
Replace the master window switch on a 2002–2006 Honda CR-V by lifting the switch panel from the door pull and transferring its fasteners.
Tools you will need
- Flat blade screwdriver
- Phillips screwdriver
Parts and supplies
- Master power-window switch
Steps
Remove the switch panel
Switch off the ignition and carefully pry the trim from inside the door pull. Lift the switch panel and unplug the window and mirror connectors by releasing their locks.
Replace the window switch
Remove the panel screws and lift the failed switch away from the bezel. Seat the replacement switch in the same position and reinstall the screws evenly.
Reconnect the panel
Reconnect the window and mirror harnesses, checking that each plug is fully seated. Align the panel with the door opening and press it down until the retainers engage.
Test the controls
Turn on the ignition and test the window and mirror controls. Confirm the trim sits flush and the switches respond correctly.
Check your vehicle’s repair manual for exact specifications and fit.