How to Replace Headlight Assemblies 2010-2013 Kia Forte Koup
Difficulty: Moderate · About 120 min · Kia Forte
Replace the headlamp assemblies on the Kia Forte Koup shown. The bumper cover is loosened for access; work carefully around its clips and disconnect the lamp wiring before removing each assembly.
Tools you will need
- trim clip tool
- Phillips screwdriver
- socket set
Parts and supplies
- Headlamp assemblies
Steps
Release the lower bumper fasteners
Raise and support the front safely. Remove the lower bumper-cover push clips, taking out each clip center before its outer body. Disconnect fog-lamp wiring as needed and repeat on the opposite side.
Loosen the bumper cover
Remove the Phillips fastener at each bumper-to-fender corner. Support the cover while releasing its side and upper retainers; avoid bending or forcing the painted tabs.
Remove the headlamp units
Disconnect the headlamp electrical connectors and remove the assembly fasteners. Lift each lamp out while guiding its tabs clear of the body.
Fit and aim the replacements
Connect and secure the replacement assemblies, then restore the bumper cover and all clips and screws. Test low and high beams, turn signals, and any fog lamps. Check headlamp aim and adjust it before night driving.
Check your vehicle’s repair manual for exact specifications and fit.