How to Replace Headlight 04-06 Chrysler Sebring
Difficulty: Beginner · About 20 min · Chrysler Sebring
Replace a headlight and its bulbs, and adjust the beam, on a 2004-2006 Chrysler Sebring.
Tools you will need
- Flat blade screwdriver
- 8mm socket
- Ratchet
Parts and supplies
- Headlight assembly
- Headlight bulb
Steps
- Remove the old headlight
Remove the bracket's two 8mm bolts, pull the headlight out, then disconnect its two wiring harnesses.
- Replace the headlight bulbs
Twist off the locking boot, twist the bulb socket counterclockwise out of the light, pull the bulb off, push the new one on, then twist the socket clockwise back in.
- Install the new headlight
Reconnect the wiring harness, line up the bracket's bolt holes with the car's, replace the 8mm bolts, then turn the headlight's adjuster screw clockwise or counterclockwise to raise or lower the beam.
Check your vehicle’s repair manual for exact specifications and fit.