How to Replace Vent Window Motor 99-04 Honda Odyssey
Difficulty: Beginner · About 45 min · Honda Odyssey
Replace the rear vent window motor on a 1999–2004 Honda Odyssey, removing the hatch trim and motor bracket before reconnecting the arm and testing the vent window.
Tools you will need
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- 10mm Wrench
- 10mm Socket
- Ratchet
Parts and supplies
- Rear vent window motor
Steps
Remove the hatch trim panel
Pry off the screw cover and remove the Phillips screw from the hatch trim. Release the trim panel clips and lift the panel away to expose the vent motor.
Remove the old vent motor
Remove the motor bracket bolts and unplug the wiring connector. Pull the vent arm from the motor, remove the motor screws, and separate the motor from its bracket.
Install the replacement motor
Attach the new motor to the bracket and tighten its fasteners evenly. Reinstall the bracket in the hatch, reconnect the wiring, and attach the vent arm to the motor output.
Test the vent and reinstall trim
Operate the switch briefly to confirm the vent window opens and closes smoothly. Turn the vehicle off, align the hatch trim with its locating tabs, and reinstall the screw and cover.
Check your vehicle’s repair manual for exact specifications and fit.