How to Replace Interior Door Handle 01-07 Ford Escape
Difficulty: Beginner · About 35 min · Ford Escape
Replace the interior door handle on a 2001–2007 Ford Escape by removing the door panel, reconnecting the latch cables, and testing the handle before reassembly is complete.
Tools you will need
- Phillips screwdriver
- Flat blade screwdriver
- Trim panel tool
Parts and supplies
- Interior door handle
Steps
- Remove the door panel
Remove the pull screw and release the handle trim, bezel, and corner trim. Free the panel clips, lift the panel away, and unplug the window switch harness.
- Remove the old handle
Pull the handle assembly from its opening and disconnect both latch cables from their retainers. Inspect the cable ends and panel clips for damage.
- Install the replacement handle
Attach the latch cables to the matching points on the new handle. Align the handle with the panel and press it into place until secured.
- Reinstall panel and test latch
Reconnect the window-switch harness and position the door panel. Press the clips in, reinstall the screws and trim pieces, then test the inside handle and lock with the door open.
Check your vehicle’s repair manual for exact specifications and fit.