How to Replace Inner Tail Light Bulbs 11-18 Volkswagen Jetta
Difficulty: Beginner · About 15 min · Volkswagen Jetta
Replace the inner tail light bulbs on a 2011-2018 Volkswagen Jetta.
Tools you will need
- Flat blade screwdriver
- 10mm socket
- Ratchet
Parts and supplies
- Tail light bulb
Steps
- Remove the tail light housing
Pop off the trim behind the light, remove its two 10mm bolts, disconnect the wiring harness, then remove it.
- Service the bulbs
Press the three tabs and lift the circuit board up, remove it, pull the bulb off the socket, push on the new bulb, then press the circuit board back into the light.
- Install the tail light housing
Connect the wiring harness, then press the housing into the car.
Check your vehicle’s repair manual for exact specifications and fit.