How to Replace Grille Nameplate 01-03 Ford Ranger
Difficulty: Beginner · About 2 min · Ford Ranger
Replace the grille nameplate on a 2001–2003 Ford Ranger by removing the grille, transferring the badge, and checking the grille retainers before closing the hood.
Tools you will need
- 5.5mm Socket
- 10mm Socket
- Ratchet
- Flat Blade Screwdriver
Parts and supplies
- Replacement grille nameplate, if needed
Steps
Release the grille
Open the hood and remove the grille-cover fasteners. Pull evenly at the headlamp and grille tabs to release the panel, then remove any clips that stayed in the body.
Transfer the badge
Remove the badge retaining nuts from behind the grille. Position the badge on the replacement grille and tighten its retainers snugly without crushing the plastic.
Reinstall the grille
Return all retainers to the grille and align its tabs with the body. Press the panel into place and reinstall the cover fasteners, then check that the grille is secure.
Check your vehicle’s repair manual for exact specifications and fit.