How to Replace Blower Motor with Fan Cage 01-07 Ford Escape
Difficulty: Beginner · About 25 min · Ford Escape
Replace the HVAC blower motor and fan cage on a 2001–2007 Ford Escape by lowering the passenger-side motor and reconnecting both blower circuits.
Tools you will need
- 8 mm socket and ratchet
Parts and supplies
- HVAC blower motor with fan cage
- Replacement foam seal if required
Steps
Disconnect the blower wiring
Switch off the ignition and locate the blower beneath the passenger-side dash. Unplug the resistor and motor connectors, releasing their locks, and free the wiring from its retaining clip.
Remove the old blower
Remove the three mounting bolts and lower the blower assembly from the HVAC case. Compare the fan orientation and sealing surfaces with the replacement before fitting it.
Prepare and install the replacement
Transfer or install the foam seal and cover as required, using suitable adhesive only where specified by the part maker. Rotate the blower into its locating points and secure its fasteners evenly.
Reconnect and test
Reconnect the motor and resistor plugs, then return the harness to its retaining clip. Run the fan at several speeds and listen for rubbing or abnormal vibration.
Check your vehicle’s repair manual for exact specifications and fit.