How to Replace Front Brakes 10-17 GMC Terrain
Difficulty: Intermediate · About 60 min · Gmc Terrain
Replace the front pads and rotors on a GMC Terrain, cleaning the slides and restoring firm pedal feel before any road test.
Tools you will need
- Floor Jack
- Jack Stands
- 14mm Socket
- 18mm Socket
- Large C-Clamp
- Torque Wrench
Parts and supplies
- Front brake pads
- Front brake rotors, if worn
Steps
Raise the vehicle and inspect
Loosen the wheel nuts while the vehicle is on the ground, lift it, and support it securely. Remove the wheel and inspect pad wear and rotor condition.
Remove the caliper and rotor
Retract the pads slightly, remove the caliper fasteners, and support the caliper by the suspension. Remove the bracket and rotor, releasing the rotor screw if fitted.
Prepare and install the replacement parts
Clean the hub face and rotor, then fit the rotor and bracket using vehicle-specific torque values. Service the slides, compress the piston gradually, install the pads, and refit the caliper.
Reassemble and test safely
Reinstall the wheel and tighten its fasteners to specification in a crossing pattern. Pump the pedal until firm, then check braking at low speed in a safe area.
Check your vehicle’s repair manual for exact specifications and fit.