How to Replace Headlights 07-09 Toyota Camry

Difficulty: Intermediate · About 60 min · Toyota Camry

Replace a headlight assembly or bulb on a 2007–2009 Toyota Camry by removing the bumper cover for access to the lamp fasteners.

Steps

1. Protect and remove the bumper cover

   Switch off the lights and ignition, then protect the painted bumper edge with tape. Release the splash shields and wheel-well fasteners, disconnect any attached lamp wiring, and support the cover as it comes away.

2. Remove the headlight

   Remove the headlight mounting fasteners and unplug its harness. For bulb-only service, twist out the appropriate socket and replace the bulb with the matching type.

3. Install the replacement lamp

   Transfer any required brackets and seals to the replacement assembly. Connect the harness, align the mounting holes, and secure the headlight evenly without overtightening.

4. Reinstall the bumper

   Hang the bumper on its upper guides and engage the side clips. Refit the wheel-well and splash-shield fasteners, confirming all edges and gaps align.

5. Check the lights

   Test low and high beams and verify the beam aim on a level surface. Use the vehicle’s aiming procedure or have the lights adjusted if they are misaligned.

Check your vehicle’s repair manual for exact specifications and fit.