How to Replace Washer Fluid Reservoir 02-06 Nissan Altima
Difficulty: Intermediate · About 5 min · Nissan Altima
Replace the windshield washer reservoir on a 2002–2006 Nissan Altima by removing the bumper cover, transferring the pump and filler neck, and checking for leaks and spray.
Tools you will need
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- Drain Pan
- 10mm Socket
- Ratchet
- Trim Tool Set
Parts and supplies
- Compatible washer reservoir
- Washer pump grommet, if needed
- Windshield washer fluid
Steps
Remove the bumper cover
Release the upper and lower clips and wheel-well fasteners, then pull the splash shield back. With a helper, disengage the bumper from its side guides and set it on a padded surface.
Disconnect pump and reservoir
Drain washer fluid into a pan, unplug the pump, and disconnect its hose. Remove the reservoir fasteners and lift the tank out, transferring the filler neck if required.
Install the replacement reservoir
Inspect the pump grommet and replace it if damaged. Fit the pump and filler neck to the new tank, mount the reservoir, and reconnect its hose and electrical plug.
Reinstall bumper and refill
Align the bumper with the impact absorber and side guides, then restore all fasteners and shields. Refill with washer fluid and test the pump for leaks and correct spray.
Check your vehicle’s repair manual for exact specifications and fit.